Hello group, I have a design requirement. Decouple the default VDC that has everything there (L2 and L3) into two separate VDCs: Core and Aggregation.
I have to move from the top diagram to the bottom diagram: http://www.ccie18473.net/dc-evolution.jpg The blue lines are L2 links and the red lines are L3 links. And two 7Ks in each DC. I have OTV on-a-stick and I want to keep it that way. But I want to move the L3 routing protocols to the Core and only keep the SVIs/HSRP in the Aggregation. Basically doing the L2/L3 boundary on the Aggregation Layer. I see many challenges when doing something like this. I wonder if there is some documentation that can help me doing this. There is the BRKDCT-2121 presentation about VDC design but is not deep enough. Thanks. Regards, Antonio Soares, CCIE #18473 (R&S/SP) amsoa...@netcabo.pt http://www.ccie18473.net _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/