I'm not sure what you'd like to accomplish with the below ospf config but it seems all wrong I don't see the point of no passive-interface cmd when the interface is not associated to any area In either process there are no interfaces associated to a particular area I'm surprised you see at least some prefixes in the lsdb
adam -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Murat Kaipov Sent: Monday, December 10, 2012 2:42 PM To: [email protected] Subject: [c-nsp] Redistributing OSPF into another OSPF process Hello guys. I have an issue on my ME3800 with redistributing ospf process into another ospf. Not all routes appears on second ospf process. This is my config: router ospf 1 router-id 172.24.203.241 no auto-cost area 197 stub redistribute static subnets route-map STATIC-OSPF1 redistribute ospf 65000 subnets redistribute bgp 65000 passive-interface default no passive-interface Vlan42 no passive-interface Vlan63 no passive-interface Vlan512 no passive-interface Vlan901 no passive-interface Vlan1025 no passive-interface Vlan3327 no passive-interface GigabitEthernet0/17 no passive-interface GigabitEthernet0/21 no passive-interface GigabitEthernet0/24 default-metric 100 bfd all-interfaces router ospf 65000 no auto-cost redistribute ospf 1 subnets route-map OSPF1-OSPF65000 passive-interface default no passive-interface Vlan101 no passive-interface Vlan401 ip route 172.24.0.0 255.255.0.0 172.24.11.97 route-map STATIC-OSPF1 permit 10 match ip address prefix-list GLOBAL-VrfPGW-PRIMARY set metric 100 route-map OSPF1-OSPF65000 permit 10 match ip address prefix-list OSPF1-OSPF65000 set metric 50 ip prefix-list GLOBAL-VrfPGW-PRIMARY seq 10 permit 172.24.0.0/16 ip prefix-list OSPF1-OSPF65000 seq 5 permit 172.24.0.0/16 So in first ospf process we see route 172.24.0.0 which was redistributed from static. sho ip ospf 1 database Type-5 AS External Link States Link ID ADV Router Age Seq# Checksum Tag 172.24.0.0 172.24.203.241 215 0x800001CF 0x00BBF5 0 172.24.17.224 172.24.203.243 1966 0x80000711 0x00D08C 0 172.24.200.2 172.24.200.206 1608 0x800023BD 0x004193 0 172.24.200.24 172.24.200.204 1256 0x80007E94 0x00860F 0 172.24.200.24 172.24.200.205 1418 0x80007E97 0x007A17 0 172.24.201.32 172.24.203.243 1966 0x80000F27 0x002423 0 172.24.202.48 172.24.203.241 970 0x80000003 0x004DC5 0 172.24.202.64 172.24.203.241 970 0x80000003 0x00AC56 0 172.24.203.129 172.24.203.241 970 0x80000003 0x003F7A 0 In second ospf process we don't see route to 172.24.0.0. sho ip ospf 65000 database Link ID ADV Router Age Seq# Checksum Tag 172.24.17.0 172.24.203.22 53 0x80000002 0x00CC57 0 172.24.17.32 172.24.203.22 53 0x80000002 0x008B78 0 172.24.17.64 172.24.203.22 53 0x80000002 0x00AA29 0 172.24.17.80 172.24.203.22 53 0x80000002 0x000AB9 0 172.24.17.96 172.24.203.22 53 0x80000002 0x00B1F5 0 172.24.17.100 172.24.203.22 53 0x80000002 0x00891A 0 172.24.17.104 172.24.203.22 53 0x80000002 0x00495A 0 172.24.17.128 172.24.203.22 53 0x80000002 0x00C7DB 0 172.24.17.160 172.24.203.22 53 0x80000002 0x0086FC 0 172.24.17.192 172.24.203.22 53 0x80000002 0x00A5AD 0 Have any ideas? B.R. Murat Kaipov _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
