Hi, Two questions regarding Cisco private vlan ports:
_I have a switch with a couple of vlans which are carried over 2 trunk ports bundled to an etherchannel to the upper router where they are routed with L3 vlan interfaces. On the switch I want some isolated private vlan ports, but I cannot set a promicious port because it is an etherchannel. Is there a workaround how to solve this or is this setup impossible? _I think private ports are working with an ingress ACL in the background? So what about IPv6 if the switch does not support IPv6 ACLs. Does that mean that private vlan isolation ports do only work for IPv4? Thanks in advance, Christian
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
