Hi, need to create protection tunnel that will protect the link or node whichever is required. On Dec 20, 2012 7:02 PM, "Jefri Abdullah" <m...@jefri.info> wrote:
> On 2012-12-20 05:05 PM, M K wrote: > > > Now , the explicit path is working fine , when I shutdown one of the >> links across the MPLS backbone , the tunnel interfaces become up again >> due to the dynamic path configured under the tunnel interface >> Now , when I remove the dynamic and configure FRR instead , the tunnel >> interface keep in the down state (it's line protocol) >> tunnel mpls traffic-eng fast-reroute bw-protect >> >> Am i missing something ? >> > > > You need to configure backup tunnel to protect the link first. > > -- > > Regards, > > Jefri Abdullah > > > Links: > ------ > [1] > https://puck.nether.net/**mailman/listinfo/cisco-nsp<https://puck.nether.net/mailman/listinfo/cisco-nsp> > [2] > http://puck.nether.net/**pipermail/cisco-nsp/<http://puck.nether.net/pipermail/cisco-nsp/> > ______________________________**_________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/**mailman/listinfo/cisco-nsp<https://puck.nether.net/mailman/listinfo/cisco-nsp> > archive at > http://puck.nether.net/**pipermail/cisco-nsp/<http://puck.nether.net/pipermail/cisco-nsp/> > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/