Whats is the purpose of Cisco router here? Just set internet modem in bridged mode and let Cisco ASA have the public IP Address ( ASA can do pppoe if required)
HTH Hitesh Vinzoda On Wed, Dec 19, 2012 at 12:25 AM, osama hammoudeh < osama.hammou...@ad-tech.com.jo> wrote: > Dears > > > > I have cisco router connected to internet modem and the public ip modem > , and cisco router connected to cisco ASA as the following : > > > > > > Modem : > > Public ip on wan interface 2.2.2.2 > > Private ip 192.168.200.1 (this interface connected to cisco router ) > > > > Cisco router : > > External interface IP 192.168.200.2 (this interface connected to the > modem) > > Internal interface ip 192.168.201.1 ((this interface connected to the > ASA) > > > > > > Cisco ASA : > > External interface IP 192.168.201.2 ((this interface connected to the > cisco router) > > Internal interface IP 192.168.1.1 (this interface used as LAN getaway ) > > > > We need to configure client vpn on ASA , how can we do this setup on ASA > and the Public IP on modem. > > > > > > Best Regards, > > > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/