Thanks Jeff. -Lee
On Fri, Jan 4, 2013 at 3:49 PM, Jeff Kell <[email protected]> wrote: > If all the cards in the chassis are DFC3BXL compatible, it should. > > I just added a 6716-10GE with DFC3C to a chassis that had some CFC-only > SFP gig blades in it (6724/6748 I think). It works, but not in DFC3C > mode, and leaves a slurry of warnings at startup. > > Jeff > > On 1/4/2013 6:39 PM, Lee Starnes wrote: > > Hello, > > > > After wading through hours of pages on Cisco's site I was not able to > > determine if the following configuration will work without having to > > upgrade either the DFC or the IOS. We have some switches that I need to > > install some 10G ports in. I have some WS-X6704-10GE blades with 3BXL DFC > > boards on them. I don't have a chassis to test with, and don't want to > ship > > these out to have them installed if they are not going to work. The > chassis > > have SUP720-3BXL's in them and are running > > s72033-advipservicesk9_wan-mz.122-33.SXH. Aside from the fact that the > IOS > > is older, does anyone see any issues with this IOS and SUP working with > the > > WS-X6704-10GE? > > > > Thanks, > > > > Lee > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
