I can verify a generic one works on SUP720-3b running 12.2(33)SRE
But not on any of the linecards we have, like 6724-sfp. This one's not in use. core-1#sh int gi8/1 transceiver Transceiver monitoring is disabled for all interfaces. ITU Channel not available (Wavelength not available), Transceiver is externally calibrated. If device is externally calibrated, only calibrated values are printed. ++ : high alarm, + : high warning, - : low warning, -- : low alarm. NA or N/A: not applicable, Tx: transmit, Rx: receive. mA: milliamperes, dBm: decibels (milliwatts). Optical Optical Temperature Voltage Current Tx Power Rx Power Port (Celsius) (Volts) (mA) (dBm) (dBm) --------- ----------- ------- -------- -------- -------- Gi8/1 15.9 3.34 0.0 N/A N/A -- core-1# ----- Original Message ----- From: "Phil Mayers" <[email protected]> To: "Tóth András" <[email protected]> Cc: "cisco-nsp" <[email protected]> Sent: Thursday, January 10, 2013 3:28:21 AM Subject: Re: [c-nsp] WS-SUP720-3B and DOM/DDM enabled SFPs On 01/10/2013 11:15 AM, Tóth András wrote: > According to Gigabit Transceiver Matrix, DOM is not supported for > SX/LH/ZX modules on 6500, neither Sup720 nor Sup2T nor 6824/6848 > linecards. I guess that's not terribly surprising given the 6848 is just a 6748 with a DFC4; I doubt they rev'd the linecard hw, so any I2C bugs probably persist. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
