Cisco Catalyst 3750 QoS Configuration Examples http://www.cisco.com/en/US/products/hw/switches/ps5023/products_tech_note09186a0080883f9e.shtml
Best regards, Andras On Tue, Jan 15, 2013 at 3:37 PM, Victor Sudakov <[email protected]> wrote: > > Terry Cheema wrote: > > Yes, you should be able to do that, but on 3560/3750 I think there's > > a limitation, it's not going to show the output of show policy-map > > interface correctly. You can use show mls qos int g0/4 instead - it > > should give you a view of whats going on... > > > > Another thing, By default qos is disabled on 3560, so no > > classification occurs, make sure to add "mls qos" to enable, just in > > case you havent done that... > > Thanks a lot, "mls qos" did the job, at least policing works. > "show mls qos int g0/4" shows that there is a policy map, but it is > not as informative as "show policy-map interface" would be. > > Could you advice a good white paper on QoS on L3 switches? > > -- > Victor Sudakov, VAS4-RIPE, VAS47-RIPN > sip:[email protected] > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
