Hi,
On 25 January 2013 06:17, Aaron <[email protected]> wrote:
>
> Need to run stp on me3600 on efp and peer out that interface with older
> cisco 4500. Here's what I did..
{cut}
>
> And if anyone has any suggestions about designing loop prevention via
> me3600's when I'm connecting legacy vlans over vpls via my mpls cloud then
> fire away.
EFPs don't support STP. You should be able to configure the interface
as a regular trunk and then run STP across it.
Peering only applies to CDP, UDLD, LLDP, MSTP, LACP, PAgP, VTP, and DTP:
http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/release/15.3_1_S/configuration/guide/swevc.html#wp1056594
kind regards
Pshem
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
