Hi I have 7606 chassis equipped with SIP 400 that reloading from time to time due to power supply issue, i don't know why in spite of the available power is 1237.74 Watts show power system power redundancy mode = redundant system power redundancy operationally = non-redundant system power total = 2669.10 Watts (63.55 Amps @ 42V) system power used = 1431.36 Watts (34.08 Amps @ 42V) system power available = 1237.74 Watts (29.47 Amps @ 42V) Power-Capacity PS-Fan Output Oper PS Type Watts A @42V Status Status State ---- ------------------ ------- ------ ------ ------ ----- 1 PWR-2700-DC 2669.10 63.55 OK OK on 2 PWR-2700-DC 1319.22 31.41 OK OK on Pwr-Allocated Oper Fan Type Watts A @42V State ---- ------------------ ------- ------ ----- 1 FAN-MOD-6SHS 180.18 4.29 OK Pwr-Requested Pwr-Allocated Admin Oper Slot Card-Type Watts A @42V Watts A @42V State State ---- ------------------ ------- ------ ------- ------ ----- ----- 1 WS-X6724-SFP 125.16 2.98 125.16 2.98 on on 2 7600-SIP-200 240.24 5.72 240.24 5.72 on on 3 7600-SIP-400 265.02 6.31 265.02 6.31 on on 5 RSP720-3C-GE 310.38 7.39 310.38 7.39 on on 6 (Redundant Sup) - - 310.38 7.39 - -
I have this log also Feb 1 20:10:43 UTC: %C7600_PWR-SP-4-PSOUTPUTDROP: Power supply 1 output has dropped Feb 1 20:10:43 UTC: %C7600_PWR-SP-4-UNDERPOWERED: insufficient power to operate all FRU s in system. Feb 1 20:10:43 UTC: %C7600_PWR-SP-4-DISABLED: power to module in slot 3 set off (FRU-power denied) Any idea please if the problem with the power supply or the power source . ZH _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
