For UDP, one would have to do something like touch the end-hosts and
adjust mtu size on the ip_stack itself. Not very scalable and may
require too much touch-points (also would be somewhat permanent).
Some client vpn shims do this to end-hosts after installations of said
software.
--
Regards,
Ge Moua
Univ of Minn Alumnus
--
On 02/11/2013 02:25 PM, Peter Rathlev wrote:
TCP MSS adjusting only works for TCP and probably puts an extra load on
the CPU of the router.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/