Thanks Nick, I will check this out. But since it's old hardware I don't expect 15.x support for it.
Anyway, thanks again, Christian >-----Ursprüngliche Nachricht----- >Von: Nick Hilliard [mailto:[email protected]] >Gesendet: Montag, 18. Februar 2013 22:50 >An: Hahn, Christian >Cc: [email protected] >Betreff: Re: [c-nsp] BGP4 MIB support on IOS 12.4 > >On 18/02/2013 10:16, [email protected] wrote: >> I have an old Cisco which I plan to use as internal BGP route >> collector using IOS 12.4(23b) Enterprise Plus. Cisco MIB site claims >> that the image supports Cisco Enterprise BGP4 MIB, but an snmpwalk for >> 1.3.6.1.4.1.9.9.187 returns nothing (yes, a "show bgp ipv6 unicast" >> returns something ;-). So I'm not sure how reliable the information on >> the Cisco MIB site is. > >> Anyone out there has a recommendation for a 12.4. image which supports >> this MIB? > >It's not supported on 12.4 - you'll need to move to vanilla IOS 15.2(4)S >/ 15.2(3)T (or IOS XR 3.4.0 if you're on an XR platform): > >> router bgp xxx >> neighbor 2001::1 remote-as 64512 >> address-family ipv6 >> neighbor 2001::1 activate > >leads to: > >> % snmpwalk -v 2c -c public 192.168.3.1 .1.3.6.1.4.1.9.9.187.1.2.7 >> SNMPv2- >SMI::enterprises.9.9.187.1.2.7.1.3.20.16.32.1.0.0.0.0.0.0.0.0.0.0.0.0.0. >1.2.1 = STRING: "IPv6 Unicast" > >w000t, finally! > >Nick _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
