DS, On the ASA it's pretty much as simple as adding a secondary peer in the crypto map, and duplicating the tunnel-group configurations for the second peer.
On the 2811, the establishment of the secondary tunnel will depend on the existence of a route in the routing table over the secondary link. Thanks, Adam -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bunny Singh Sent: Wednesday, February 20, 2013 1:58 AM To: [email protected] Subject: [c-nsp] IPSEC Tunnel between ASA and IOS (with redundant link) HI, i have a cisco asa 5520 at site A and cisco 2811 at site B with two P2P links (Redundant) Link, Now i want to know the configuration to built a redundant ipsec tunnel. I have read couple of article, but didn't got the success. Ospf routing is running between these devices. Regards DS _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
