I admit that it would be "cleaner" to configure a bit smaller MTU on interface PW-Ether555 but it does not effect PW MTU itself.
As you can see from the initial post show l2vpn xconnect neighbor ... detail command, MTU is equal on local and remote. IOS-XR does a really good job on this show ... detail. Aivars > "mtu" on IOX is L2, IOS treats it as packet mtu. > -- > Christian > On 27.02.2013, at 07:49, Artyom Viklenko <[email protected]> wrote: >> 26.02.2013 08:13, Aivars ?????: >>> >>> >>> interface PW-Ether555 >>> >>> mtu 9216 >> [...] >>> >>> 7600: >>> >>> interface TenGigabitEthernet3/4.555 >>> >>> encapsulation dot1Q 555 >>> >>> xconnect 192.168.0.2 555 encapsulation mpls >>> >>> mtu 9202 >> >> Hi! I'm not sure about ASR9K, but is it ok that you have different MTU >> on opposite side? Between two 7600-s VC didn't come up if MTU mismatch. >> >> >> >> -- >> Sincerely yours, >> Artyom Viklenko. >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
