'sho run in te1/16' Sounds like you have dtp on it currently and it doesn't like that... Try defaulting the interface first?
------Original Message------ From: CiscoNSP List Sender: cisco-nsp-boun...@puck.nether.net To: cisco-nsp@puck.nether.net Subject: [c-nsp] 4500-X VSS %EC-5-CANNOT_BUNDLE2 Sent: Mar 7, 2013 9:39 PM Hi Guys, Following this guide: https://supportforums.cisco.com/docs/DOC-29472 and when trying to add the physical Int to the portchan, I get: %EC-5-CANNOT_BUNDLE2: TE1/16 is not compatible with PO5 and will be suspended (trunk mode of TE1/16 is dynamic, P05 is trunk) Config has been entered as per the above doc - Any suggestions as to why this is happening? Both switches are running: cat4500-e-ios-promupgrade-150-1r-SG7cat4500e-universalk9.SPA.03.04.00.SG.151-2.SG.bin Cheers. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/