>Is it possible to monitor the performance of the ESP in the ASR 1000 series. >We have the asr 1002-F andThe ESP is listed at 2.5Gbps. We would like to see >when were getting close to that.
We use this command on a asr 1001 show platform hardware qfp active datapath utilization The bottom line shows processing load in % //MKS _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/