I have 7K with fabricpath, SVI's, and routed interfaces... The box is purely F2 linecards... I'm not aware of limitations and I have not had any problems with it thus far...
-----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Chris Evans Sent: Thursday, March 21, 2013 11:57 AM To: cisco-nsp Subject: [c-nsp] Fabricpath and L3 on the same line card Can anyone tell me if Cisco F2/F2e line modules can run Fabricpath and L3 (SVI's) on the same line module. Is it line rate as well or does it proxy through an ASIC burning ports, etc. Is an M1 module required? Someone has told me it cannot, but I believe it can. Are there any limitations with it? _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/