vPC or EvPC are the tools used to dual-home FEXs to 5Ks. You can also use vPC to dual home your 5ks or FEXs to 7Ks. FabricPath has nothing to do with it.
If you are deploying FabricPath you would setup FP between the 5Ks and 7Ks and out. This also depends on your design and need, of courses. Check out the N5K design guides for more information. http://www.cisco.com/en/US/products/ps9670/products_implementation_design_guides_list.html Ryan Booth -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Lars Christensen Sent: Thursday, April 04, 2013 12:13 PM To: Arne Larsen / Region Nordjylland Cc: '[email protected]' Subject: Re: [c-nsp] fabricpath and dual-homed fex HI Arne, You need to have a look at enhanced vPC configuration for the N5K. Lars Christensen CCIE #20292 Den 04/04/2013 kl. 06.57 skrev Arne Larsen / Region Nordjylland <[email protected]>: > Hi all > > Can someone give me a hint here. > Isn't it possible to have dual-homed fex on nexus5k when you are running > fabricpath. The 5K is Layer2 only. > I can't find any doc that describes this. > > /Arne > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
