Unfortunately NXOS on the UCS fabric interconnects is apparently limited to read only mode (according to TAC); any changes have to go through the web interface and they've intentionally disabled any option of using unsupported transceivers.
Back to the drawing board, David > -----Original Message----- > From: cisco-nsp-boun...@puck.nether.net > [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Maarten Carels > Sent: Friday, April 12, 2013 10:21 AM > To: Cisco Network Service Providers > Subject: Re: [c-nsp] Way to get 3rd party optics to work in UCS/FEX? > > On 12 Apr 2013, at 16:09 , David Hubbard wrote: > > > Ah, that got me close but unfortunately the command > > isn't there: > > > > fab1-A(nxos)# service unsupported-transceiver > > ^ > > % Invalid command at '^' marker. > > > > Maybe it would show up if I upgrade? It's been > > about a year; currently running 2.02q: > > > In configuration mode? > > --maarten > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/