Antonis, What kind of HW do you have on your 7600? You need ES20/ES+ on the interface facing the ME3600 to be able to terminate a PW on a L3 interface.
Arie -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Antonis Vosdoganis Sent: Monday, April 15, 2013 05:49 To: [email protected] Subject: [c-nsp] Routed Pseudowire Hi We are trying to establish ip connectivity a host and an SVI HOST(192.168.33.2/24)----->ME3600------>7609(SVI:192.168.33.1/24) ME3600 vlan 250 name RPW interface GigabitEthernet0/23 switchport trunk allowed vlan none switchport mode trunk service instance 250 ethernet encapsulation untagged bridge-domain 250 interface Vlan250 no ip address xconnect 172.16.0.0 250 encapsulation mpls 7609 vlan 250 name RPW interface Vlan250 ip address 192.168.33.2 255.255.255.0 xconnect 172.18.0.17 250 encapsulation mpls Keep in mind 7609 has only one core facing L3 interface. >From mpls l2 detailed 7609 VC statistics: transit packet totals: receive 29, send 0 transit byte totals: receive 4252, send 0 transit packet drops: receive 0, seq error 0, send 0 3600 VC statistics: transit packet totals: receive 0, send 31 transit byte totals: receive 0, send 4496 transit packet drops: receive 0, seq error 0, send 0 Packet recieved from 3600 no packets send from 7609. Any ideas? I have read that this is a working scenario. Regards _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
