On 4/22/13 10:40 AM, "Rolf Hanßen" wrote:
Hello,
after 2 afternoons of trial and error I now got it running.
I replaced the memory modules (RP and SP Ram, not the flash) and could
boot from the 64MB flash modules then.
The CF card was still not accepted.
I needed to boot into some older image, format the CF card in disk0 of the
Sup720.
Then needed to copy the files again via TFTP to CF, move the CF card to
the adapter and boot the image via rommon.
RAM on the Sup720's MSFC3 can be picky. I'd have to look it up to
confirm, but at some point during the production of the MSFC3, Cisco
changed RAM types it uses.
Have managed to fix 'broken' Sup720-3bxl boards that refuse to boot by
swapping them to the older RAM types, and suddenly they are happy.
--
Brielle Bruns
The Summit Open Source Development Group
http://www.sosdg.org / http://www.ahbl.org
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
