Hello folks, We're going through setting up multicasting in our network between some core ASR9K's and some edge ME3600's. The underlying multicasting is implemented and working well, but we're having some trouble in getting the vrf's working correctly for multicasting. Would someone be able to offer some sagely advice and some pointers as to what we're doing wrong or not doing??
Leigh Config for one of the 9K's:- vrf multicast_test address-family ipv4 unicast import route-target 64900:123456 ! export route-target 64900:123456 ! ! router pim address-family ipv4 auto-rp mapping-agent Loopback0 scope 20 interval 60 auto-rp candidate-rp Loopback0 scope 20 group-list 224-4 interval 60 interface Loopback0 enable ! interface TenGigE0/3/1/0 enable ! interface TenGigE0/3/1/3 enable ! interface TenGigE0/4/1/3 enable ! interface GigabitEthernet0/3/0/0 enable ! ! vrf multicast_test address-family ipv4 rp-address 200.200.200.11 interface Loopback239 enable ! ! ! ! router igmp interface Loopback0 join-group 239.0.0.239 ! vrf multicast_test interface Loopback239 join-group 239.0.1.239 ! ! ! interface Loopback239 vrf multicast_test ipv4 address 200.200.200.11 255.255.255.255 ! router bgp 64900 vrf multicast_test rd 64900:12345611 address-family ipv4 unicast redistribute connected ! ! ! RP/0/RSP0/CPU0:CH-LHC-ASR9010-1#sh pim vrf multicast_test interface Fri Apr 26 17:19:30.029 BST PIM interfaces in VRF multicast_test Address Interface PIM Nbr Hello DR DR Count Intvl Prior 200.200.200.11 Loopback239 on 1 30 1 this system 10.200.2.9 mdtmulticast/test on 2 30 1 10.200.5.1 RP/0/RSP0/CPU0:CH-LHC-ASR9010-1#sh pim vrf multicast_test neigh Fri Apr 26 17:19:34.212 BST PIM neighbors in VRF multicast_test Neighbor Address Interface Uptime Expires DR pri Flags 200.200.200.11* Loopback239 03:03:26 00:01:37 1 (DR) B P 10.200.2.9* mdtmulticast/test 01:42:23 00:01:22 1 10.200.5.1 mdtmulticast/test 01:42:16 00:01:19 1 (DR) P RP/0/RSP0/CPU0:CH-LHC-ASR9010-1#ping vrf multicast_test 239.0.1.239 Fri Apr 26 17:22:45.480 BST Mdef cons get failed for VRF 0x60000003 - No such process Config for the ME3600 (directly connected) CG-Peer1-3600ME-1#sh run vrf multicast_test Building configuration... Current configuration : 444 bytes ip vrf multicast_test rd 64900:12345615 mdt default 239.0.0.1 mdt data 239.0.1.0 0.0.0.255 threshold 1 route-target export 64900:123456 route-target import 64900:123456 ! ! interface Loopback239 ip vrf forwarding multicast_test ip address 200.200.200.15 255.255.255.255 ip pim sparse-mode ip igmp join-group 239.0.1.239 ! router bgp 64900 ! address-family ipv4 vrf multicast_test redistribute connected exit-address-family ! end CG-Peer1-3600ME-1# CG-Peer1-3600ME-1#sh ip pim vrf multicast_test int CG-Peer1-3600ME-1#sh ip pim vrf multicast_test interface Address Interface Ver/ Nbr Query DR DR Mode Count Intvl Prior 10.200.5.1 Tunnel1 v2/S 1 30 1 10.200.5.1 200.200.200.15 Loopback239 v2/S 0 30 1 200.200.200.15 CG-Peer1-3600ME-1#sh ip pim vrf multicast_test neigh PIM Neighbor Table Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, P - Proxy Capable, S - State Refresh Capable, G - GenID Capable Neighbor Interface Uptime/Expires Ver DR Address Prio/Mode 10.200.2.9 Tunnel1 01:43:11/00:01:28 v2 1 / G ______________________________________________________________________ This email has been scanned by the Symantec Email Security Cloud System, Managed and Supported by TekNet Solutions (http://www.teknet.co.uk) ______________________________________________________________________ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/