Hi all, i'm a bit confusing to read the fiber transceiver detail. Which one is the correct one in brackets or outside the bracket. Whats the bracket means.
Thank you. cisco#sh int gi1/16 trans det ITU Channel not available (Wavelength not available), Transceiver is externally calibrated. mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable. ++ : high alarm, + : high warning, - : low warning, -- : low alarm. A2D readouts (if they differ), are reported in parentheses. The threshold values are calibrated. High Alarm High Warn Low Warn Low Alarm Temperature Threshold Threshold Threshold Threshold Port (Celsius) (Celsius) (Celsius) (Celsius) (Celsius) ------- ------------------ ---------- --------- --------- --------- Gi1/16 38.7 110.0 93.0 -3.0 -9.0 High Alarm High Warn Low Warn Low Alarm Voltage Threshold Threshold Threshold Threshold Port (Volts) (Volts) (Volts) (Volts) (Volts) ------- --------------- ---------- --------- --------- --------- Gi1/16 3.26 4.00 3.70 2.90 2.80 High Alarm High Warn Low Warn Low Alarm Current Threshold Threshold Threshold Threshold Port (milliamperes) (mA) (mA) (mA) (mA) ------- ----------------- ---------- --------- --------- --------- Gi1/16 22.0 84.0 70.0 4.0 2.0 Optical High Alarm High Warn Low Warn Low Alarm Transmit Power Threshold Threshold Threshold Threshold Port (dBm) (dBm) (dBm) (dBm) (dBm) ------- ----------------- ---------- --------- --------- --------- Gi1/16 2.9 ( 1.7) 8.1 6.9 -2.0 -4.0 Optical High Alarm High Warn Low Warn Low Alarm Receive Power Threshold Threshold Threshold Threshold Port (dBm) (dBm) (dBm) (dBm) (dBm) ------- ----------------- ---------- --------- --------- --------- Gi1/16 -23.3 (-17.4) - 0.7 -1.0 -20.0 -24.0 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
