I have MVPN running on ME3600-X. Most common things to forget is ip pim spare-mode on loopback interface or ip multicast-routing vrf xyz.
Please post relevant config. Fredrik Vöcks Senior IP Network Engineer On 23 May 2013 08:38, PlaWanSai <pws_ad...@thaicpe.com> wrote: > I try to run Multicast VPN on the ME-3600 back-to-back with the 7609. It > does not see pim neighbor. I tested on 15.1(2)EY4, 15.3(1)S and 15.3(2)S > IOS > version. I used this configuration between 7609 is work. > > > > test-co3600#sho ip pim vrf IPTV-M nei > > PIM Neighbor Table > > Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, > > P - Proxy Capable, S - State Refresh Capable, G - GenID Capable > > Neighbor Interface Uptime/Expires Ver DR > > Address > Prio/Mode > > test-co3600# > > > > Thank you very much. > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
