I had the same issue but my router IOS did not support IP SLA, I did it
with EEM.
Ping,
see if reply
add route
if no reply
remove route
wait 15 seconds, do ping again
> 3. Static Route (M K)
>
>
> ------------------------------
>
> Message: 3
> Date: Thu, 4 Jul 2013 15:03:42 +0300
> From: M K <[email protected]>
> To: "[email protected]" <[email protected]>
> Subject: [c-nsp] Static Route
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset="windows-1256"
>
> I have two routers connected to each other , I have configured a loopback
> interface on The second router and configured a static route to reach it ,
> now when i shutdown the loopback interface the static route is still in the
> routing table , how can i remove that route automatically when i lose
> reachability to the loopback interface ? should i use IP sla ?
>
>
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
