Nope, there's no access-list, no CoPP, no nothing regarding security so far.
On Fri, Aug 9, 2013 at 4:02 PM, Chuck Church <chuckchu...@gmail.com> wrote: > Any control plane policing in action? If Nexus support it, I'm not sure... > > Chuck > > -----Original Message----- > From: cisco-nsp [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of > Christian Kildau > Sent: Friday, August 09, 2013 9:33 AM > To: Rati Berikaant Jokhadze > Cc: cisco-nsp@puck.nether.net > Subject: Re: [c-nsp] Nexu 5020 HSRP issues > > sw2# sh run int vlan200 > > !Command: show running-config interface Vlan200 > !Time: Fri Aug 9 13:32:04 2013 > > version 5.2(1)N1(5) > > interface Vlan200 > no shutdown > description vlan fuer HNAS 10.8.200.0/24 - HSRP 10.8.200.1 > no ip redirects > ip address 10.8.200.3/24 > hsrp version 2 > hsrp 1 > preempt > ip 10.8.200.1 > > sw1# ping 10.8.200.3 > PING 10.8.200.3 (10.8.200.3): 56 data bytes > 64 bytes from 10.8.200.3: icmp_seq=0 ttl=254 time=2.524 ms > 64 bytes from 10.8.200.3: icmp_seq=1 ttl=254 time=0.954 ms > 64 bytes from 10.8.200.3: icmp_seq=2 ttl=254 time=0.854 ms > 64 bytes from 10.8.200.3: icmp_seq=3 ttl=254 time=1.138 ms > 64 bytes from 10.8.200.3: icmp_seq=4 ttl=254 time=0.875 ms > > --- 10.8.200.3 ping statistics --- > 5 packets transmitted, 5 packets received, 0.00% packet loss round-trip > min/avg/max = 0.854/1.268/2.524 ms > > > > > Am 09.08.2013 um 14:30 schrieb Rati Berikaant Jokhadze: > > > Hi , > > > > Please share us SW2 int vlan200 config. > > > > and ping result from sw1 to sw2 > > > > On 08/09/2013 03:52 PM, Christian Kildau wrote: > >> Hi Cisco-NSP, > >> > >> we're having some very strange issues while adding HSRP to our Nexus > 5020 > where both HSRP peers are up, but don't recognize each other, thus causing > some issues. > >> > >> Our config is pretty simple, running 4 VLANs and VPC. VPC is up and the > Trunks are running fine. > >> > >> We now added some SVIs for L3 routing which also seems to be working > fine. > >> But as soon as we add HSRP config as follows: > >> > >> interface Vlan200 > >> no shutdown > >> no ip redirects > >> ip address 10.8.200.2/24 > >> hsrp version 2 > >> hsrp 1 > >> preempt > >> priority 110 > >> ip 10.8.200.1 > >> > >> we're facing some very strange issues. > >> According to 'debug hsrp engine packet hello' both sides do send HSRP > Hello Packets, but the other end never receives them, so both peers are in > Active state: > >> > >> sw1# sh hsrp group 1 brief > >> Interface Grp Prio P State Active addr Standby addr Group > addr > >> Vlan200 1 110 P Active local unknown > 10.8.200.1 > >> (conf) > >> sw2# sh hsrp group 1 brief > >> Interface Grp Prio P State Active addr Standby addr Group > addr > >> Vlan200 1 100 P Active local unknown > 10.8.200.1 > >> (conf) > >> > >> What could cause this? > >> > >> Thanks for any hint! > >> > >> Kind Regards > >> Christian > >> > >> P.S. > >> features are enabled of course ;-) > >> _______________________________________________ > >> cisco-nsp mailing list cisco-nsp@puck.nether.net > >> https://puck.nether.net/mailman/listinfo/cisco-nsp > >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > -- > http://www.chrisk.de/ <http://puck.nether.net/pipermail/cisco-nsp/> > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/