Hi, Christian ! A have already read early answer about L3 Card and I agree with guys. Nexus 5000 without L3 Doughter Card can do only L2 features.
I will get N5548 with L3 daughter card in few weeks and if You want I could try to test creation and working of HSRP with and without this card. But 99% that root cause is in it. Have a nice day. --- Sergey 2013/8/9 Christian Kildau <[email protected]> > I'm sorry, please ignore the last message, Type-2 consistency status was > due to some testing: > Heres the correct vpc status: > > Legend: > (*) - local vPC is down, forwarding via vPC peer-link > > vPC domain id : 1 > Peer status : peer adjacency formed ok > vPC keep-alive status : peer is alive > Configuration consistency status : success > Per-vlan consistency status : success > Type-2 consistency status : success > vPC role : secondary, operational primary > Number of vPCs configured : 2 > Peer Gateway : Enabled > Peer gateway excluded VLANs : - > Dual-active excluded VLANs : - > Graceful Consistency Check : Enabled > Auto-recovery status : Enabled (timeout = 240 seconds) > > vPC Peer-link status > --------------------------------------------------------------------- > id Port Status Active vlans > -- ---- ------ -------------------------------------------------- > 1 Po1 up 1,200-202,2810 > > vPC status > > ---------------------------------------------------------------------------- > id Port Status Consistency Reason Active > vlans > ------ ----------- ------ ----------- -------------------------- > ----------- > 1 Po2 up success success 200 > 2 Po3 up success success 200 > > > On Fri, Aug 9, 2013 at 5:57 PM, Christian Kildau <[email protected]>wrote: > >> Yes, vlan200 goes trough vpc peer-link: >> >> # show vpc >> Legend: >> (*) - local vPC is down, forwarding via vPC peer-link >> >> vPC domain id : 1 >> Peer status : peer adjacency formed ok >> vPC keep-alive status : peer is alive >> Configuration consistency status : success >> Per-vlan consistency status : success >> Type-2 consistency status : failed >> Type-2 inconsistency reason : VTP type-2 configuration incompatible >> vPC role : secondary, operational primary >> Number of vPCs configured : 2 >> Peer Gateway : Enabled >> Peer gateway excluded VLANs : - >> Dual-active excluded VLANs : - >> Graceful Consistency Check : Enabled >> Auto-recovery status : Enabled (timeout = 240 seconds) >> >> vPC Peer-link status >> --------------------------------------------------------------------- >> id Port Status Active vlans >> -- ---- ------ -------------------------------------------------- >> 1 Po1 up 1,200-202,2810 >> >> vPC status >> >> ---------------------------------------------------------------------------- >> id Port Status Consistency Reason Active >> vlans >> ------ ----------- ------ ----------- -------------------------- >> ----------- >> 1 Po2 up success success 200 >> 2 Po3 up success success 200 >> >> >> On Fri, Aug 9, 2013 at 4:50 PM, Сергей Кремезной <[email protected]>wrote: >> >>> Hi! >>> >>> Through what links (and their config) does Vlan200 go? If its vPC >>> peer-link, please show all vpc-related information: >>> >>> # show vpc [all possible keys] >>> >>> Good day. >>> >>> --- >>> Sergey >>> _______________________________________________ >>> cisco-nsp mailing list [email protected] >>> https://puck.nether.net/mailman/listinfo/cisco-nsp >>> archive at >>> http://puck.nether.net/pipermail/cisco-nsp/ >>> >>> -- >>> http://www.chrisk.de/ >>> >>> -- >>> http://www.chrisk.de/ <http://puck.nether.net/pipermail/cisco-nsp/> >>> >> _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
