archive
path usbflash0:backup-config
ctrl+z
wr
conf t revert time 1
if everything will be OK enter
configure confirm
if not configuration will be restored in one min without reboot
On 08/13/2013 09:48 AM, Gert Doering wrote:
Hi,
On Mon, Aug 12, 2013 at 02:56:26PM -0700, Michael Sprouffske wrote:
Is there a safe way to change the speed and duplex of a remote routers WAN
connection without taking down the link while making the changes? I know if
you change the speed and its wrong you will lose connectivity. I have a link
that is setup auto, but my isp has their end setup 10 full. I would prefer not
to drive all the way to this place to change the speed to 10 full on the wan
interface.
reload in 5
conf t
int FOO
speed 10
duplex full
^Z
reload cancel
(that won't guarantee "no outage", but if something goes wrong changing
the interface config, the router will reboot into it's previous config
5 minutes later, so you get another try)
gert
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
