On 12/08/2013 20:31, Michael Sprouffske wrote:
I currently have a juniper ssl vpn appliance. Is there any way to prioritize
traffic going over an ssl vpn connection? The voip works well until someone
dowloads a file through the vpn and then the voip experiences latency. Is
there a appliance that will do this on the box itself or is this not possible?
I don't think my asa 5525 will do this either. Does anybody have a way that
they can prioritize traffic going over an ssl vpn?
_______________________________________________
If you are not in control of how much data the remote end sends you over
your choke points then there is little you can do.
I believe the Juniper SSL VPN boxes have bandwidth management for
Network Connect clients, but you cannot control how much data you
receive from client-less VPN clients or anyone else for that matter.
For your outbound traffic you can prioritise your VoIP traffic, use
policers & queueing on your choke points, most any IOS based router can
be configured for that.
--
Regards,
Giles Coochey, CCNP, CCNA, CCNAS
NetSecSpec Ltd
+44 (0) 8444 780677
+44 (0) 7983 877438
http://www.coochey.net
http://www.netsecspec.co.uk
[email protected]
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
