Hi Pete, Thanks for the info . Best Regards, ibog
On Tue, Aug 20, 2013 at 4:09 PM, Pete Lumbis <[email protected]> wrote: > Another 7600 quirk. > > CSCsg20022 - ACL counters for BFD packets don't increment with CoPP > > Sounds like CoPP applies the QoS policy in hardware and the counters you > see in CoPP are based on packets seen outside of CEF in software. Since BFD > is in the CEF path, not the process path, these packets end up bypassing > the process path and don't update the counters. > > > > > On Tue, Aug 20, 2013 at 4:51 AM, ibogzipper iboge <[email protected]>wrote: > >> Hi all, >> Does BFD packet hits the control plane? I'm facing one issue one 7600 >> where >> I can't see the ACL hit count on the control plane . >> 190 permit udp 172.25.33.0 0.0.0.255 172.25.33.0 0.0.0.255 eq 3784 >> 200 permit udp 172.25.33.0 0.0.0.255 172.25.33.0 0.0.0.255 eq 3785 >> >> But if the line is missing we are observing the BFD session flap. whether >> ACL counters won't increase if the ACL treated in LC ? or am i missing >> anything >> >> Regards, >> ibog. >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
