I used this configure not work.
ASR9K: interface TenGigE0/0/0/3.12 l2transport encapsulation dot1q 12 rewrite ingress tag pop 1 symmetric mtu 1544 ! l2vpn xconnect group asrl2vpn p2p TestL2vpn5 interface TenGigE0/0/0/3.12 neighbor 10.5.0.90 pw-id 1190122000 pw-class mpls ! ! ! ! ME-C3750-24TE: vlan 12 name asrl2vpn ! interface Vlan12 no ip address xconnect 10.5.0.122 1190122000 encapsulation mpls end We have following connections: ME-C3750-24TE Gi 1/1/2 <----> Ge 9/1(WS-X6724-SFP) CISCO7609-S (76-ES+T-4TGQ) TE 2/1 <----> Te 0/9/0/11 (14-10GbE) CSR3 (14-10GbE) Te0/9/0/10 <----> TenGigE0/0/0/0 ASR9010 Te0/0/0/3 Here is the output os show ... command asr9k10#sh platform Thu Aug 22 21:28:28.085 BKK Node Type State Config State ----------------------------------------------------------------------------- 0/RSP0/CPU0 A9K-RSP440-SE(Active) IOS XR RUN PWR,NSHUT,MON 0/RSP1/CPU0 A9K-RSP440-SE(Standby) IOS XR RUN PWR,NSHUT,MON 0/0/CPU0 A9K-MOD80-SE IOS XR RUN PWR,NSHUT,MON 0/0/0 A9K-MPA-4X10GE OK PWR,NSHUT,MON 0/0/1 A9K-MPA-4X10GE OK PWR,NSHUT,MON 0/1/CPU0 A9K-MOD80-SE IOS XR RUN PWR,NSHUT,MON 0/1/0 A9K-MPA-4X10GE OK PWR,NSHUT,MON asr9k10#sh l2vpn xconnect int Te0/0/0/3.12 detail Thu Aug 22 21:29:43.824 BKK Group asrl2vpn, XC TestL2vpn5, state is down; Interworking none AC: TenGigE0/0/0/3.12, state is up Type VLAN; Num Ranges: 1 VLAN ranges: [12, 12] MTU 1526; XC ID 0x4000e; interworking none Statistics: packets: received 0, sent 0 bytes: received 0, sent 0 drops: illegal VLAN 0, illegal length 0 PW: neighbor 10.5.0.90, PW ID 1190122000, state is down ( all ready ) PW class mpls, XC ID 0xc000000c Encapsulation MPLS, protocol LDP Source address 10.5.0.122 PW type Ethernet, control word enabled, interworking none PW backup disable delay 0 sec Sequencing not set MPLS Local Remote ------------ ------------------------------ ----------------------------- Label 18618 3465 Group ID 0x180 0x0 Interface TenGigE0/0/0/3.12 unknown MTU 1526 1526 Control word enabled disabled PW type Ethernet Ethernet VLAN VCCV CV type 0x2 0x2 (LSP ping verification) (LSP ping verification) VCCV CC type 0x7 0x2 (control word) (router alert label) (router alert label) (TTL expiry) ------------ ------------------------------ ----------------------------- MIB cpwVcIndex: 3221225484 Create time: 22/08/2013 17:55:16 (03:34:02 ago) Last time status changed: 22/08/2013 17:55:17 (03:34:02 ago) Error: illegal control word Statistics: packets: received 0, sent 0 bytes: received 0, sent 0 3750#sh mpls l2 vc det Local interface: Vl12 up, line protocol up, Eth VLAN 12 up Destination address: 10.5.0.122, VC ID: 1190122000, VC status: down Output interface: if-?(0), imposed label stack {} Preferred path: not configured Default path: no route No adjacency Create time: 04:41:32, last status change time: 03:38:36 Signaling protocol: LDP, peer 10.5.0.122:0 up Targeted Hello: 10.5.0.90(LDP Id) -> 10.5.0.122 Status TLV support (local/remote) : enabled/not supported Label/status state machine : remote invalid, LruRru Last local dataplane status rcvd: no fault Last local SSS circuit status rcvd: no fault Last local SSS circuit status sent: PW DOWN(rx,tx faults) Last local LDP TLV status sent: no fault Last remote LDP TLV status rcvd: not sent MPLS VC labels: local 3465, remote 18618 Group ID: local 0, remote 384 MTU: local 1526, remote 1526 Remote interface description: TenGigE0_0_0_3.12 Sequencing: receive disabled, send disabled VC statistics: packet totals: receive 0, send 0 byte totals: receive 0, send 0 packet drops: receive 0, send 0 Thank you very much. > From: t...@bobbroadband.com > To: pws_ad...@thaicpe.com; cisco-nsp@puck.nether.net > Subject: RE: [c-nsp] How to configuration mpls l2vpn between asr9k and 3750? > Help me please! > Date: Thu, 22 Aug 2013 13:59:55 +0000 > > Assuming you are using the ME-C3750-24TE , here's a sample config that's > working for us (MPLS MUST be enabled on one of the special ES Uplink ports > for any MPLS to work): > > interface FastEthernet1/0/6 > description Customer-interface > switchport trunk encapsulation dot1q > !VLAN 2643 is used as a native, to provide the customer > !Internet transit as well as Pseudowire > !The customer tags pseudowire traffic with VLAN 912 (or we tag it for them > with a switch) > switchport trunk native vlan 2643 > switchport trunk allowed vlan 912, 2643 > switchport mode trunk > no cdp enable > > interface Vlan912 > description pseudowire > no ip address > !use the loopback of the other side of the pseudowire tunnel > xconnect a.b.c.d 912 encapsulation mpls > end > > And on the other end (which is actually a 6503-E/Sup720, but should be > similar): > interface GigabitEthernet2/45.912 > description pw-2pp-8nh-evergent > encapsulation dot1Q 912 > !use the loopback of the 3750 > xconnect w.x.y.z 912 encapsulation mpls > end > > Tim Huffman > Director of Engineering > Business Only Broadband > 999 Oak Creek Dr, Lombard, IL 60148 > Direct: 630.590.6012 | Main: 630.590.6000 | Fax: 630.986.2496 > thuff...@bobbroadband.com | http://www.bobbroadband.com/ > Cell: 630.340.1925 | Toll-Free Customer Support: 877.262.4553 > Follow Us on LinkedIn | Follow Us on Twitter > please consider the environment prior to printing > > -----Original Message----- > From: cisco-nsp [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of > PlaWanSai RMUTT CPE IX > Sent: Thursday, August 22, 2013 5:47 AM > To: cisco-nsp@puck.nether.net > Subject: [c-nsp] How to configuration mpls l2vpn between asr9k and 3750? Help > me please! > > Hello all, > > How to configuration mpls l2vpn between asr9k and 3750? Help me please! > > > > Thank you very much. > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/