Hi all,
I used this configure on PE1:
interface GigabitEthernet9/16.12
description test redundant psedowire
encapsulation dot1Q 12
xconnect 10.5.0.38 1138074000 encapsulation mpls
backup peer 10.5.0.87 1174087000
end
When I shutdown interface of 10.5.0.38, log on PE is ok.
267506: Sep 3 08:45:51.820 bkk: %XCONNECT-5-PW_STATUS: MPLS peer 10.5.0.38
vcid 1138074000, VC DOWN, VC state DOWN
267507: Sep 3 08:45:51.828 bkk: %XCONNECT-5-PW_STATUS: MPLS peer 10.5.0.87
vcid 1174087000, VC UP, VC state UP
But I ping from switch that connect with PE1 not work until
I ping back from switch that connect with 10.5.0.87.
Success rate is 92 percent (927/1000), round-trip min/avg/max = 1/3/26 ms
Why it doesn't automatic?
Thank you very much.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
