Thanks.....does anyoane know how I would find the Port?Asics mappings?.
Rgds Harry Harry Hambi BEng(Hons) MIET Rsgb -----Original Message----- From: a.l.m.bu...@lboro.ac.uk [mailto:a.l.m.bu...@lboro.ac.uk] Sent: 12 September 2013 11:57 To: Harry Hambi Cc: 'cisco-nsp@puck.nether.net' Subject: Re: [c-nsp] Input Errors And CRC Errors Hi, > Trying to diagnose a problem on a 6509 chasis, port showing input and > CRC errors on one end of the link. The link is a Tengigabit I'me going to try > the follwing: > Change fibre clean/check fibre first. ensure its the right type of fibre for the link length and media converter type > Change Gbic, if errors are still showing try changing port. yep. only once you reach this stage should you start thinking about ASICs and ports - which are documented in the technical specifications of the blades. do the quick simple stuff before opening up technical docs ;-) alan ----------------------------- http://www.bbc.co.uk This e-mail (and any attachments) is confidential and may contain personal views which are not the views of the BBC unless specifically stated. If you have received it in error, please delete it from your system. Do not use, copy or disclose the information in any way nor act in reliance on it and notify the sender immediately. Please note that the BBC monitors e-mails sent or received. Further communication will signify your consent to this. ----------------------------- _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/