The 9010 with the non-RSP440 is about 184G/slot using both fabrics.. I am not entirely sure the 100G cards work without the 440...
Phil From: Jason Lixfeld Sent: 9/19/2013 23:15 To: cisco-nsp NSP Subject: [c-nsp] A9K 40G & 100G I'm wondering if anyone knows off the top of their head what the limitations are in terms of 40/100G LC support with RSP4. I seem to remember reading something at some point saying if with an RSP4/8, two are required and both are required to run active/active. Whereas with an RSP440, which has more fabric capacity, wouldn't require a second fabric active at the same time. Thanks! Sent from my iPhone _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/