Hi, Has anyone experienced an issue where generating keys on an ASR1002 just freezes the box? I am configuring it through the console port. The software is the 15.1(3) xe-rommon stuff. Does cisco do anything weird with their images like Junos does here ssh is available only on the domestic images? I've generated theys keys a lot in the past past but have not seen this yet, usually its instantanous. Have tried three times now with each time needing a power cycle to get life into the box again. There nothing in the logs to indicate what could be going wrong.
asr1002-r01(config)#crypto key generate rsa general-keys modulus 2048 The name for the keys will be: asr1002-r01 % The key modulus size is 2048 bits % Generating 2048 bit RSA keys, keys will be non-exportable...Oct 8 09:14:18 ts01 event_notify: EVT[4]:Session terminated. Command issued by user: ?. Terminated user: root. Connection to ts1 closed. -- Regards, Darius _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
