We've been using SmartOptics products for quite some time. Seems stable. /Lars
Sendt fra min iPhone > Den 23/10/2013 kl. 18.32 skrev Brian Turnbow <[email protected]>: > > Hello Everyone, > > We are looking into upgrading some links actually on a cwdm run to 10Gig. > After looking into DWDM equipment I was told to check into 10Gig CWDM plugs > offered in sfp+ xenpak x2 xfp etc > Such as the ones offered by smartoptics > http://www.smartoptics.com/optical-transceivers/10g-ethernet-2/ > > As we would like to add this to our existing 6500s does anyone have any > experience using the x2/xenpaks in a cisco 6500 environment? > AFAIK cisco does not support 10G CWDM plug ins, at least I can't find > anything stating that they do publically. > > They are telling me it'll work but is "unsupported" , yet I would sleep > better at night knowing that we are not beta testers > > > > Thanks > > Brian > > > --- > This e-mail is intended only for the addressee named above. > As this e-mail may contain confidential or privileged information, > if you are not the named addressee, you are not authorized to retain, read, > copy or disseminate this message or any part of it. > > Please consider your environmental responsibility before printing this e-mail. > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
