Same here. We use /128s and configure the loopback interface to be part
of the ospf process and given area.
Jose
On 11/21/2013 5:10 AM, Phil Mayers wrote:
On 21/11/13 08:38, CiscoNSP List wrote:
Hi Everyone,
What is "recommended" practice when configuring OSPFv3/IPv6
Loopbacks? Do you assign /128's or /64's - If /64's do you need to
enable "ipv6 ospf network point-to-point" under the loopback so that
the IPv6 address is advertised as a /64 and not as /128?
We do /128 and there is no complex config beyond the ospf area:
interface Loopback1
ipv6 address 2001:db8:12::1/128
ipv6 ospf 1 area 0
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
