Me3600/ME3800 use EVCs for q-in-q configuration: http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/release/15.3_3_S/configuration/guide/swevc.html#wp1043415
> -----Original Message----- > From: cisco-nsp [mailto:[email protected]] On Behalf Of > Olivier CALVANO > Sent: Tuesday, December 17, 2013 8:06 AM > To: [email protected] > Subject: [c-nsp] Cisco ME3800 and QinQ > > Hi > > i want use a Cisco 3800 for change a old cisco 3750 but i have a > problems: > > ME3800(config-if)#switchport mod > ME3800(config-if)#switchport mode ? > access Set trunking mode to ACCESS unconditionally > trunk Set trunking mode to TRUNK unconditionally > > i don't have the dot1q-tunnel , anyone know why ? > > sh ver: > > *Dec 17 12:39:16.043: %SYS-5-CONFIG_I: Configured from console by > consoler > Cisco IOS Software, ME380x Software (ME380x-UNIVERSALK9-M), Version > 15.2(4)S4, RELEASE SOFTWARE (fc2) > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2013 by Cisco Systems, Inc. > Compiled Sun 01-Sep-13 18:29 by prod_rel_team > > ROM: Bootstrap program is WHALES boot loader > BOOTLDR: ME380x Boot Loader (ME380X-HBOOT-M) Version 12.2(52r)EY2, > RELEASE > SOFTWARE (fc1) > > ME3800-1 uptime is 23 minutes > System returned to ROM by power-on > System image file is > "flash:/me380x-universalk9-mz.152-4.S4/me380x-universalk9-mz.152- > 4.S4.bin" > Last reload reason: Unknown reason > > > > This product contains cryptographic features and is subject to United > States and local country laws governing import, export, transfer and > use. Delivery of Cisco cryptographic products does not imply > third-party authority to import, export, distribute or use encryption. > Importers, exporters, distributors and users are responsible for > compliance with U.S. and local country laws. By using this product you > agree to comply with applicable laws and regulations. If you are unable > to comply with U.S. and local laws, return this product immediately. > > A summary of U.S. laws governing Cisco cryptographic products may be > found > at: > http://www.cisco.com/wwl/export/crypto/tool/stqrg.html > > If you require further assistance please contact us by sending email to > [email protected]. > > License Level: MetroEthServices > License Type: Permanent > Next reload license Level: MetroEthServices > > cisco ME-3800X-24FS-M (PowerPC8572) processor (revision A0) with > 1015808K/32760K bytes of memory. > Processor board ID FOC1545V26H > Last reset from power-on > 1 Virtual Ethernet interface > 25 Gigabit Ethernet interfaces > 2 Ten Gigabit Ethernet interfaces > The password-recovery mechanism is enabled. > > 1536K bytes of flash-simulated non-volatile configuration memory. > Base ethernet MAC Address : D4:D7:48:BC:43:80 > Motherboard assembly number : 73-12068-07 > Motherboard serial number : FOC154050PU > Model revision number : A0 > Motherboard revision number : B0 > Model number : ME-3800X-24FS-M > System serial number : FOC1545V26H > Top Assembly Part Number : 800-31465-01 > Top Assembly Revision Number : B0 > Version ID : V01 > CLEI Code Number : IPMSW00DRA > > Configuration register is 0xF > > > thanks for your help > best regard > jerome > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
