On 09/01/14 14:47, Ben Hammadi, Kayssar (NSN - TN/Tunis) wrote:
Dears ,
We have two 6509 interconnected via port-channel of two 10Ge port
carrying about 3Gb. the module used is WS-X6716-10T and only the two
mentioned port are used on this module for the moment . We are now
adding a monitoring probe that will be connected on this module , the
estimated monitored traffic is about 8Gb . Since this module has an
oversubscription rate of 4:1 , i need to check :
You need to be really careful with this on a 6716. As you have hinted,
you absolutely can blow away production traffic.
* On witch port it is recommended to connect the new probe
without affecting the port channel
An unused port-group, or one with <2Gb/sec of TX traffic.
* can one port on this module reach 8Gb of monitored traffic
Yes, but only if the 4-port port-group has 8Gbit/sec of TX capacity.
* the monitored traffic will be added to the actual Swicth load
or it is transparent ?
Not sure what this means.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
