Hi All,
I am using a SFP-10GBase-ER for my Cisco3750X for a 10gig link going to a
Juniper MX router.
I am receiving following logs on my Cisco3750X.
%SFF8472-5-THRESHOLD_VIOLATION: Te1/1/2: Rx power low alarm; Operating
value: -21.3 dBm, Threshold value: -20.0 dBm.
Does this mean I have to increase the power on the interface?
Or is there anything else I need to look at?
Following are the readings from my Juniper router.
Laser rx power high alarm threshold : 1.2589 mW / 1.00 dBm
Laser rx power low alarm threshold : 0.0158 mW / -18.01 dBm
Laser rx power high warning threshold : 1.0000 mW / 0.00 dBm
Laser rx power low warning threshold : 0.0199 mW / -17.01 dBm
*Regards,*
*Ali Sumsam*
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
