You could check the ASR901 It is hardened and it supports an extended temperature range
Currently it only supports MPLS/EoMPLS, but VPLS is coming this summer George On Tue, Feb 4, 2014 at 12:28 PM, Richard Hartmann < [email protected]> wrote: > Dear all, > > weirdly, the archives don't seem to handle this use case, thus I am > starting a new thread. > > We are using a mix of C6500 and ME3600 to collect Metro services > (plain Internet upstream, BGP, OSPF, M/VPLS P and PE, QinQ, ideally > service instances). > > As our network grows, we are increasingly faced with outdoor POPs > being the only viable choice. > > That means > * condensing humidity > * wide temperature ranges > * short unit depths > > > Given the requirements above, what would be a decent hardware platform > for us? Both new and near-EoL equipment would be fine. > > > > Thanks, > Richard > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
