On Wednesday, February 05, 2014 10:45:54 AM Mikael Abrahamsson wrote: > I did a TAC case on a 7200 with FE a lot of years back, > and the conclusion was that etherchannel load balancing > didn't work very well. > > I would recommend you to use ECMP instead (have two links > with separate IPs on them) and see if that works better.
LACP isn't supported on the 7200 (tried in IOS 15S). So I wouldn't recommend attempting LAG's on the 7200. As suggested, run IP on two links and have the same IGP metric for load balancing + BFD for early link failure signaling. Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
