On an ME3400, I can see how l2protocol-tunneling is behaving:
pe01.156FrontStW01.YYZ#show l2protocol-tunnel
COS for Encapsulated Packets: 5
Drop Threshold for Encapsulated Packets: 0
Port Protocol Shutdown Drop Encaps Decaps Drop
Threshold Threshold Counter Counter Counter
------------------- ----------- --------- --------- --------- ---------
---------
Fa0/7 cdp ---- ---- 0 0 0
lldp ---- ---- 3474 0 0
stp ---- ---- 252958 0 0
vtp ---- ---- 0 0 0
--- ---- ---- ---- ----
----
--- ---- ---- ---- ----
----
--- ---- ---- ---- ----
----
pe01.156FrontStW01.YYZ#
On an ME3600, however, the command is nowhere to be found and my google-fu
seems to be sedated.
!
interface GigabitEthernet0/7
switchport trunk allowed vlan none
switchport mode trunk
mtu 1600
no keepalive
service instance 888 ethernet
encapsulation default
l2protocol tunnel
xconnect 72.15.50.96 888 encapsulation mpls
backup peer 72.15.50.98 888
!
Any ideas?
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
