Rob, VPLS should be support on GSR 12K routers with SIP-600 (engine 5...) It should actually have somewhat less restrictions than the engine 3 ISE modules...
I do think (it has been a long time since I had to really touch it) that you need to run IOS-XR for that. Check this configuration guide for some details (there might be newer one available...): http://www.cisco.com/c/en/us/td/docs/routers/xr12000/software/xr12k_r4-1/lxvpn/configuration/guide/vc41xr12k/vc41vpls.html Arie -----Original Message----- From: cisco-nsp [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Robert Hass Sent: Thursday, February 20, 2014 12:27 To: cisco-nsp@puck.nether.net Subject: [c-nsp] VPLS on GSR12k Hi I have question regarding linecards which supports VPLS. Here is only one linecard (ISE 4x1G) supported as edge side for VPLS: http://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/vpls_qos.html Can I have edge side on SIP+SPA ? My GSR is only equipped with SIP-600 and SPA cards Rob _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/