Hi I have attached a description diagram
http://postimg.org/image/cbm1xp3c7/ svis are on the 6500 destination is 11 hops away and route is learned from BGP table the first hop is an isp i hope this is bit clear On Wednesday, February 26, 2014 2:15 PM, naresh reddy <[email protected]> wrote: Hi phil/Velimir its our edge router a 6500 with sup 3b its has SVIs and the isp terminates on the same device when reaching a desitination we are loosing packets when sources form some vlans but not in other int vlan 1 -------> bgp peer int---------------------->DESintation int vlan 2 -------> |<-------same 6500---> Nareshchandra Paturi On Wednesday, February 26, 2014 1:35 PM, Phil Mayers <[email protected]> wrote: On 26/02/14 13:02, naresh reddy wrote: > Hi All > > i am seeing a wierd issue on a 6500 > > wee are seeing packet loss to a remote location when sourced form some SVIs > > but not when sourced from some other SVis That's a bit vague. You'll need to be more specific about topology and config for people to help you. Please specify software and module version/types, sample config of SVIs and ports they're on. As someone else points out, it could be a faulty link. Have you checked the "sh int" counters? Alternatively it could be TCAM mis-program, and CPU punt; you can use SPAN/ERSPAN to check this. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
