Yep, requires routing SDM template.
On Fri, Feb 28, 2014 at 9:10 AM, Phil Mayers <p.may...@imperial.ac.uk>wrote: > On 28/02/14 13:41, Michael Robson wrote: > > >> However, now when I apply a created route-map to an interface, it take the >> 'ip policy route-map' command but nothing appears on configuration for the >> SVI. If I apply a non-existent policy map to the same interface, the >> configuration shows up on the SVI. >> > > By "route-map" I assume you actually mean "policy routing"? > > You might (probably do) need a routing SDM template for that. > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/