Hi, I've been working on a basic configuration for E-OAM starting with one domain. I have CFM working between the PEs (IOS-XR) devices tied to an EoMPLS instance, but have a few questions below:
1) I "think" I should be seeing MIPs in my traceroute when there is a P router in between the two PEs, correct? 2) If the P router in between these PEs is just a transit node, what configuration is required to create the MIPs? I have seen the MIP autocreate all, but it seems to be tied to a service configuration under CFM which would not apply in the case of a transit/P router. Thanks! _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/