Thanks all for the kind replies , I will make another test and feed you back
BR,
Date: Wed, 5 Mar 2014 02:05:17 -0800
From: monito...@yahoo.com
Subject: Re: [c-nsp] Event Manager Script
To: oboeh...@cisco.com; gunner_...@live.com; cisco-nsp@puck.nether.net
HiTry with 120 seconds delay. Also use environment variable to depicting to get
email whensoever event triggers.Ami
On Wednesday, March 5, 2014 10:01 AM, Oliver Boehmer (oboehmer)
<oboeh...@cisco.com> wrote:
can you just remove the "action 2.0 reload" from the script for the test so
the router just spits out the syslog and then send
the logs?I noticed that the maximum "delay down" value accepted by the parser
is 180 (3 minutes), maybe it didn't accept the command when you pasted it? I
just tested this (with 60 sec delay), and it seems to work fine ("debug track"
enabled):router(config)#Mar 5 09:53:14.230: Track: 99 Down change delayed for
60 secsMar 5 09:54:14.231: Track: 99 Down change delay expiredMar 5
09:54:14.231: Track: 99 Change #3 ip sla 99, reachability Up->DownMar 5
09:54:14.231: %TRACKING-5-STATE: 99 ip sla 99 reachability Up->DownMar 5
09:54:14.239: %HA_EM-6-LOG: reload-if-down: Reloading the router due to
unreachabilityand as EEM only triggers on up->down
transition, it only takes action when the probe was up at least once. so this
is good..oliFrom: M K <gunner_...@live.com<mailto:gunner_...@live.com>>Date:
Wednesday, 5 March 2014 09:26To: Oliver Boehmer
<oboeh...@cisco.com<mailto:oboeh...@cisco.com>>,
"cisco-nsp@puck.nether.net<mailto:cisco-nsp@puck.nether.net>"
<cisco-nsp@puck.nether.net<mailto:cisco-nsp@puck.nether.net>>Subject: RE:
[c-nsp] Event Manager ScriptHi , thanks and sorry for the late replyI am facing
some issues with the script , when the IP SLA is down , the router did not wait
for the 5 minutes , it reloaded directly> From:
oboeh...@cisco.com<mailto:oboeh...@cisco.com>> To:
gunner_...@live.com<mailto:gunner_...@live.com>;
cisco-nsp@puck.nether.net<mailto:cisco-nsp@puck.nether.net>> Subject: Re:
[c-nsp] Event Manager Script> Date: Sun, 2 Mar 2014 12:33:34 +0000>>>> >Hi allI
am trying to do a event manager script that will do the below and> >need some
assistanceI want to ping to a specific destination and if th!
e> >ping request
timed out for a period of for example 5 minutes , the router> >should be
reloaded>> not sure whether this is a good idea or not (the router could
reload> forever), here is a way to achieve the goal:>> ip sla 1> icmp-echo
<destination-addr>> frequency 20> ip sla schedule 1 life forever start-time
now> !>> track 1 ip sla 1 reachability> delay down 300> !> event manager applet
reload-if-down> event track 1 state down> action 1.0 syslog msg "Reloading the
router due to unreachability"> action 2.0 reload>> hope this helps..>>
oli>_______________________________________________cisco-nsp mailing list
cisco-nsp@puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-nsparchive
at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
