Yeah sometimes when feature is enabled on an interface in SW it is not propagated to the HW There's a command that displays enabled features on a particular interface to check that out
adam > -----Original Message----- > From: cisco-nsp [mailto:[email protected]] On Behalf Of > Richard Hartmann > Sent: Wednesday, March 26, 2014 3:16 PM > To: [email protected] > Subject: Re: [c-nsp] IOS XR on ASR9001: Some LDP on Interfaces stuck in xmit > > I fixed the issue by reloading the whole machine. > > To quote Nick Hilliard: "honestly though, rebooting usually doesn't fix things > in XR" and up to a few minutes ago, I think we both agreed on that. The rest > of what we said can not be quoted in polite conversation. > > As a data point, I installed the FPD pie after the initial boot, but to the > best of > my knowledge, this should not matter. > > > I will now find a 2x4 to chew on, > Richard > > PS: I tried all the various combinations of removing config stanzas, ACLs, > interface shut/no shut, and all the other usual suspects first. > It really was the reload... argh... > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
