Hi Guys, I'm hoping that someone can assist in debugging something rather strange. I have a 7206 (NPE-G1) terminating PPPoEoE sessions. AAA is working fine and Authentication as well as Authorization happens as expected. However, for some reason, the 7200 refuses to send any Accounting information. I'm sure this must be something stupid and small that I am overlooking - hopefully a fresh pair of eyes will spot what I'm failing to see! :-)
Version: Cisco IOS Software, 7200 Software (C7200-ADVSECURITYK9-M), Version 15.2(4)M4, RELEASE SOFTWARE (fc2) Relevant configurations: aaa new-model aaa session-mib disconnect aaa group server radius MYRADIUS server x.x.x.43 auth-port 1812 acct-port 1813 ip radius source-interface Loopback0 attribute nas-port format a load-balance method least-outstanding mac-delimiter colon aaa authentication login MYRADIUS group radius local aaa authentication ppp default group MYRADIUS aaa authorization exec MYRADIUS group radius local aaa authorization network default group MYRADIUS aaa accounting send stop-record always aaa accounting delay-start aaa accounting session-duration ntp-adjusted aaa accounting update newinfo periodic 30 aaa accounting network default start-stop group MYRADIUS aaa nas port extended aaa session-id common radius-server attribute 44 extend-with-addr radius-server attribute 6 mandatory radius-server attribute 32 include-in-access-req radius-server attribute 32 include-in-accounting-req radius-server attribute nas-port format b radius-server attribute 61 extended radius-server attribute 31 mac format ietf upper-case radius-server host x.x.x.43 auth-port 1812 acct-port 1813 key 7 a radius-server retransmit 2 radius-server timeout 10 radius-server unique-ident 5 radius-server load-balance method least-outstanding debug aaa accounting: 000279: Apr 5 12:12:09.718: AAA/ACCT/CLIENT(0000001A): recv 1000000000bps xmit 1000000000bps 000280: Apr 5 12:12:09.718: AAA/ACCT/HC(0000001A): Register PPPoE/5B00001C 64 bit counter support not configured 000281: Apr 5 12:12:09.718: AAA/ACCT/HC(0000001A): Update PPPoE/5B00001C 000282: Apr 5 12:12:09.718: AAA/ACCT/HC(0000001A): no HC PPPoE/5B00001C 000283: Apr 5 12:12:09.718: AAA/ACCT/EVENT/(0000001A): CALL START 000284: Apr 5 12:12:09.718: Getting session id for NET(0000001A) : db=6AB5C8B8 000285: Apr 5 12:12:09.718: AAA/ACCT(00000000): add node, session 215 000286: Apr 5 12:12:09.718: AAA/ACCT/NET(0000001A): add, count 1 000287: Apr 5 12:12:09.718: AAA/ACCT/NET(0000001A): Pick method list 'default' 000288: Apr 5 12:12:09.718: AAA/ACCT/SETMLIST(0000001A): Handle 0, mlist 6A148168, Name default 000289: Apr 5 12:12:09.718: AAA/ACCT/EVENT/(0000001A): ATTR REPLACE 000290: Apr 5 12:12:09.718: AAA/ACCT(0000001A): Accounting response status = FAILURE 000291: Apr 5 12:12:09.718: AAA/ACCT(0000001A): Send NEWINFO accounting notification to EM successfully 000292: Apr 5 12:12:09.718: AAA/ACCT/EVENT/(0000001A): ATTR REPLACE 000293: Apr 5 12:12:09.718: AAA/ACCT/EVENT/(0000001A): ATTR REPLACE 000294: Apr 5 12:12:09.838: Getting session id for NET(0000001A) : db=6AB5C8B8 000295: Apr 5 12:12:10.842: Getting session id for NET(0000001A) : db=6AB5C8B8 000296: Apr 5 12:12:10.850: AAA/ACCT/NET(0000001A): Pick method list 'default' 000297: Apr 5 12:12:10.850: AAA/ACCT/SETMLIST(0000001A): Handle 0, mlist 6A148168, Name default 000298: Apr 5 12:12:10.850: AAA/ACCT/EVENT/(0000001A): NET UP 000299: Apr 5 12:12:10.850: AAA/ACCT/CLIENT(0000001A): recv 1000000000bps xmit 1000000000bps 000300: Apr 5 12:12:10.850: AAA/ACCT/HC(0000001A): Update PPPoE/5B00001C 000301: Apr 5 12:12:10.850: AAA/ACCT/HC(0000001A): no HC PPPoE/5B00001C 000302: Apr 5 12:12:10.862: AAA/ACCT/EVENT/(0000001A): IPCP_PASS 000303: Apr 5 12:12:10.862: AAA/ACCT/NET(0000001A): Queueing record is START 000304: Apr 5 12:12:10.862: AAA/ACCT(0000001A): Accounting method=MYRADIUS (RADIUS) 000305: Apr 5 12:12:10.862: AAA/ACCT/NET(0000001A): Suppressed record <<< Accounting supressed and not sent. 000306: Apr 5 12:12:10.862: AAA/ACCT(0000001A): mlist_periodic is not set, interval 0 000307: Apr 5 12:12:10.862: AAA/ACCT(0000001A): Resetting Periodic timer 600 Many thanks, Chris. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
